Using the smallest measurement, subtract 1/4 to 1/2 total to find the valance width you need to order. The faux shade valance needs this small amount of breathing room so that the folds can hang freely.

Lined Faux Fake Flat Roman Shade Valance, Oriental

Measure the height from the spot you marked to the top of the window sill.

How to measure for faux roman shades. This is your ordering width. The formula then for the length of my fabric was: Steps to measure your windows for custom shades.

Measure the height at 3 places: How to measure the height for wood / faux wood blinds on a door: Have the right tools for the job.

Round down to the nearest 1/8. Use a steel measuring tape. Always measure width (left to right) first and height (top to bottom) second

Our method does not use metal staples in the back, but is sewn with thread. Length should also be equal to the length of your window, plus 16 inches.) traverse cord or roman shade cord, two pieces. Use a steel tape measure, never cloth.

Measurement from top of curtain rod to bottom of window + 2” of seam allowance + (2 times the height of curtain rod + 1”). Add 1 1/2 inches for hold down brackets (optional but recommended) how to measure the height for honeycomb cellular shades on a door: Measure to the nearest 1/8 of an inch, if the size is on a 1/16 mark, then round down to the next 1/8.

To get started simply measure the width and length of the glass, if you have raised moulding around the glass that you wish to cover measure from the outside of. Measure inside window frame width to within 1/4 at several areas of the frame. Measure width • measure the horizontal width of the area you wish to cover.

I made a video to kind of show you how i. Place a step ladder close to and at the right angles to the window, with the front or the. Measure the overall area to be covered.

Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Left side, middle and right side. It’s important to note you can’t make a spring rod faux roman shade for a window wider than a tension rod can securely fit in, the shade will fall.

I added two inches to the width (an inch on either side to hem) and. How to measure for roman shades tips to getting started. I first measured the inside of my window frame.

The second piece should be equal to. Measure the inside width at 3 places: Measure both the width of the window and the height of the window.

We also use minimal sewing for the folds to give you a smooth front. Okay, now that we have the materials out of the way, here is how i made the faux roman shades: Add 2 inches for installation brackets.

Record the narrowest width of the 3 measurements down to the closest 1/8. The top, middle and bottom. Add 2 1/2″ at the bottom for the hem and add 3″ for header or however big you want it to be.

Take a look below for the tools, tips, and tricks you need to get perfect measurements. Add 1 inch for installation brackets (one piece should be equal to the height of your window, plus the top length, with some inches for allowance.

Begin by measuring the width of the window. Before getting to work, prepare the tools you’ll need for measuring your windows. Enter the smallest measurement on your worksheet.

If you are getting a 1/16 or 1/32 increment, round down to the nearest 1/8. If there is no sill, measure below the window opening to your desired length. Print out the measuring guide you need.

Fold each edge over 1/4″ and then fold over for the complete measurement, iron and pin. Roman shades allow you to dress up your room in almost any fashion or style to suit your taste. Use a steel tape measure for accuracy, and provide all measurements to the nearest 1/8 determine if your window has sufficient depth to install as an inside mount ;

Measure from left to right and measure at the top, middle, and then bottom of the window. 2″ for each side as per drawing. Determine where you want the top of your roman shade to be and mark the spot.

(this is going to look so great, you should be smiling!) how to make diy faux roman shades with tension rods. Making the faux roman shades without hardware. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.

Make sure you have a sturdy step ladder, a steel measurement tape, and a pen and paper, then proceed with the following steps on how to measure your windows for shades:. Our faux shades can be purchased in width increments of a half inch (1/2 or 0.5). (blindsgalore takes necessary deductions.) step 2:

Functional roman shades need to be as long as the window when they are finished, so i just decided to go with that plan. Getting the job done right is all about having the right tools at your disposal.